How to Install LED Flood Light for Backyard – Light Sun Factory

Before installing the LED flood light, in order to ensure the quality of its use after installation, it is recommended to carry out a detailed inspection before installation to see if the appearance is damaged, whether the accessories are complete, and how is after-sales service, check carefully every time.

After making sure the appearance is not damaged and the accessories are complete, the LED floodlights need to be ready for installation after arriving at the construction site. First, organize the installers according to the installation drawings attached by the factory, and connect a few floodlights to test whether the installation drawings are correct or not. , If conditions permit, you can test the lights one by one, so as to avoid getting them upstairs and installing them if they are broken, they have to be dismantled again to reduce labor costs.

Remind the installer of the importance of fixing and wiring, especially the waterproof grade of outdoor wiring is very important, and it is best to review it when fixing and wiring.

After the LED flood light is fixed and connected, it is best to use a multimeter on the main power supply to check whether there is a short circuit in the wrong connection when you are ready to test it.

After all the LED floodlights have been tested, try to light them for as long as possible, and recheck them on the second and third day. After doing this, if all of them are good, there will be no problems later. .

1. Please read the instruction manual of LED flood light carefully before use.

2. Non-professional technicians, please do not repair or modify the product without authorization.

3. Please turn off the power before installation to avoid electric shock due to improper operation.

4. Before installation, please pay attention to check whether the voltage marked on the flood light is consistent with the input voltage to be connected, so as not to damage the LED flood light.

5. If the wire of the lamp body is found to be damaged, please turn off the power immediately and stop using it.